Skip to Content

Products

L Series - FTXS25LVMA

L Series - FTXS25LVMA Image

-Standby Power Function
When the heat pump is not in use, the standby power function turns off power supply to the outdoor unit and sets the indoor unit into standby energy saving mode, reducing energy consumption.

-Power-Airflow Dual Flaps
Power-airflow dual flaps can flatten out during cooling operation to deliver cool air to the corners of a room. The flaps can direct warm air straight down to the floor during heating operation.

-Wide Angle Louvres
Smoothly cured wide angle louvres provide wide airflow coverage to effective cooling/heating operation.

-Vertical Auto-Swing
This function automatically moves the flaps up and down to distribute air across the room.

-Horizontal Auto-Swing
This function automatically moves the louvres to the left and right to cover the room with cool/warm air.

-3-D Airflow
Combines vertical and horizontal auto-swing to circulate cool/warm air to the corners or large spaces.

-Comfortable Mode
The new flap changes the delivery angle to horizontal for cooling and vertical for heating operation, to prevent cold or warm air from blowing directly onto your body.

-Indoor Unit Quiet Operation
Sound levels are reduced by 2-3 decibels from the low fan speed for quitter heating and cooling.

-Outdoor Unit Quiet Operation
Outdoor unit sound levels can be reduced by 3dB for times when quieter operation is needed

-Intelligent Eye
This is an infrared motion sensor with the ability to sense movement in the room. When you are in the room, the heat pump operates normally. If no activity is detected in a room for more than 20 minutes the heat pump automatically changes to in energy-saving operation.

-Automatic Operation (reverse cycle only)
For year-round comfort, this function allows the unit to automatically switch between heating and cooling modes as required.

-Program Dry Function
The system reduces the humidity in the room while maintaining the temperature as much as possible. It automatically controls the temperature and airflow rate and will switch into cooling mode if the room temperature increases too much.

-Auto Fan Speed
To reduce operating noise, the fan speed is automatically controlled by the micro-processor to suit the thermostat setting and prevailing room temperature.

-Hot Start (reverse cycles only)
When heating commences, or when changing from cooling to heating, airflow doesn’t start until the air is worm, preventing cold draughts.

-Automatic Defrost
During heating operation in low ambient temperature condition, frost can form on the outdoor unit heat exchanger which can reduce your heat pumps performance. Daikin intelligent defrost system constantly monitors a range of system parameters and temperatures to determine the optimum time to commence a defrost operation for a maximum performance in cold conditions.

-Titanium Apatite Photocatalytic Air Purifying Filter
Traps most microscopic particles and decomposes odours to purify the air in your room.

-Air Purifying Filter
Traps microscopic particles and decomposes odours to purify the air in your room.

-Wipe Clean
The panels of the heat pump can be cleaned with a cloth across the smooth surface.

-Econo Mode
Controls the upper limit of frequency, reducing power consumption. This reduces the load on the electrical circuit when multiple electrical devices are used simultaneously.

-LCD Wireless Remote Control

-Indoor Unit On/Off Switch

-24-Hour On/Off Timer
The timer can be preset to start and stop the heat pump at any time within a 24-hour period. Once the times are set, the heat pump can be operated for a period by simply pressing the On or OFF timer buttons.

-Weekly Timer
This function makes it easy to enter up to four settings per day for each day of the week. It not only allows you to program on and off time, but also the desired temperature.

-Night Set Mode
Through the use of the ‘Timer-Off Circuit’, the preset room temperature gently rises in cooling or falls in heating before the unit stops. This energy efficient feature allows you to sleep comfortably without feeling a sudden change in the room temperature.

-Auto Restart after Power Failure
The unit memorises the operation mode, airflow and temperature settings. Should there be a power failure when the unit is in operation, it will automatically return to the same operating conditions when the power is restored.

-Self-Diagnosis with Digital Display.
In the unlikely event that a problem develops with the unit, malfunction codes can be displayed on the liquid crystal panel of the remote control for fast and easy fault diagnosis.

-Anti-Corrosion Treatment of Outdoor Heat Exchanger Fin
The special anti-corrosion coating on the outdoor unit heat exchanger ensures greater resistance to salt damage and atmospheric corrosion.

-Energy Star Rating 5

-Refrigerant Type R410A

Heating Capacity: 3.4kW
Heating Efficiency: Coefficient of Performance (COP) 4.86
Cooling Capacity: 2.5kW
Cooling Efficiency: Energy Efficiency Ratio (EER) 4.63

Dimension (H x W x D)
Indoor – 295 x 800 x 215
Outdoor – 550 x 765 x 285

L Series - FTXS25LVMA

L Series - FTXS25LVMA Image

-Standby Power Function
When the heat pump is not in use, the standby power function turns off power supply to the outdoor unit and sets the indoor unit into standby energy saving mode, reducing energy consumption.

-Power-Airflow Dual Flaps
Power-airflow dual flaps can flatten out during cooling operation to deliver cool air to the corners of a room. The flaps can direct warm air straight down to the floor during heating operation.

-Wide Angle Louvres
Smoothly cured wide angle louvres provide wide airflow coverage to effective cooling/heating operation.

-Vertical Auto-Swing
This function automatically moves the flaps up and down to distribute air across the room.

-Horizontal Auto-Swing
This function automatically moves the louvres to the left and right to cover the room with cool/warm air.

-3-D Airflow
Combines vertical and horizontal auto-swing to circulate cool/warm air to the corners or large spaces.

-Comfortable Mode
The new flap changes the delivery angle to horizontal for cooling and vertical for heating operation, to prevent cold or warm air from blowing directly onto your body.

-Indoor Unit Quiet Operation
Sound levels are reduced by 2-3 decibels from the low fan speed for quitter heating and cooling.

-Outdoor Unit Quiet Operation
Outdoor unit sound levels can be reduced by 3dB for times when quieter operation is needed

-Intelligent Eye
This is an infrared motion sensor with the ability to sense movement in the room. When you are in the room, the heat pump operates normally. If no activity is detected in a room for more than 20 minutes the heat pump automatically changes to in energy-saving operation.

-Automatic Operation (reverse cycle only)
For year-round comfort, this function allows the unit to automatically switch between heating and cooling modes as required.

-Program Dry Function
The system reduces the humidity in the room while maintaining the temperature as much as possible. It automatically controls the temperature and airflow rate and will switch into cooling mode if the room temperature increases too much.

-Auto Fan Speed
To reduce operating noise, the fan speed is automatically controlled by the micro-processor to suit the thermostat setting and prevailing room temperature.

-Hot Start (reverse cycles only)
When heating commences, or when changing from cooling to heating, airflow doesn’t start until the air is worm, preventing cold draughts.

-Automatic Defrost
During heating operation in low ambient temperature condition, frost can form on the outdoor unit heat exchanger which can reduce your heat pumps performance. Daikin intelligent defrost system constantly monitors a range of system parameters and temperatures to determine the optimum time to commence a defrost operation for a maximum performance in cold conditions.

-Titanium Apatite Photocatalytic Air Purifying Filter
Traps most microscopic particles and decomposes odours to purify the air in your room.

-Air Purifying Filter
Traps microscopic particles and decomposes odours to purify the air in your room.

-Wipe Clean
The panels of the heat pump can be cleaned with a cloth across the smooth surface.

-Econo Mode
Controls the upper limit of frequency, reducing power consumption. This reduces the load on the electrical circuit when multiple electrical devices are used simultaneously.

-LCD Wireless Remote Control

-Indoor Unit On/Off Switch

-24-Hour On/Off Timer
The timer can be preset to start and stop the heat pump at any time within a 24-hour period. Once the times are set, the heat pump can be operated for a period by simply pressing the On or OFF timer buttons.

-Weekly Timer
This function makes it easy to enter up to four settings per day for each day of the week. It not only allows you to program on and off time, but also the desired temperature.

-Night Set Mode
Through the use of the ‘Timer-Off Circuit’, the preset room temperature gently rises in cooling or falls in heating before the unit stops. This energy efficient feature allows you to sleep comfortably without feeling a sudden change in the room temperature.

-Auto Restart after Power Failure
The unit memorises the operation mode, airflow and temperature settings. Should there be a power failure when the unit is in operation, it will automatically return to the same operating conditions when the power is restored.

-Self-Diagnosis with Digital Display.
In the unlikely event that a problem develops with the unit, malfunction codes can be displayed on the liquid crystal panel of the remote control for fast and easy fault diagnosis.

-Anti-Corrosion Treatment of Outdoor Heat Exchanger Fin
The special anti-corrosion coating on the outdoor unit heat exchanger ensures greater resistance to salt damage and atmospheric corrosion.

-Energy Star Rating 5

-Refrigerant Type R410A

Heating Capacity: 3.4kW
Heating Efficiency: Coefficient of Performance (COP) 4.86
Cooling Capacity: 2.5kW
Cooling Efficiency: Energy Efficiency Ratio (EER) 4.63

Dimension (H x W x D)
Indoor – 295 x 800 x 215
Outdoor – 550 x 765 x 285