Products

GEH18 Floor Console (5.0kW)

GEH18 Floor Console (5.0kW) Image

-180 Degree Sine
Balances input power supply to give more efficient performance.

-High speed DSP (Digital Signal Processor)
More efficient control

-Twin Rotary Compressor
Smoother rotation and less vibration

-Power Factor Correction Technology (PWM)
Gives highers efficiency and better compressor protection by matching the inverter control wave to a smoothed sine wave form.

-1W Standby, PCB Protection
Reduces energy consumption. Switched mode power supply gives better printed circuit board protection between 85V – 265V

-Quiet

-Better Air Quality
Includes a range of filters that clean the indoor air and remove oxygen free radicals thus improving the air quality.

-Intelligent Defrosting
Only performed when needed, which reduces energy/waste by eliminating unnecessary defrosting.

-Cold Air Prevention
To prevent cold air brewing into a room when the unit is first turned on or after defrosting the indoor fan will remain off until the indoor coil reaches the desired room temperature setting.

-Mould and Odour Prevention
Once the heat pump is switched off the air direction panel closes and the indoor fan continues to run until the indoor coil is dry. This helps to keep the coil clean and prevents the growth of mould and bacteria as well as reducing bad odours in the heat pump.

-Wide Temperature Operation
Designed to operate efficiently from -15 to +45 deg C.

-De-humidifying

-Sleep Mode

-Turbo Mode

-Intelligent Air Flow

-Anti-Corrosion Outdoor Unit

-Functions for Low Ambient Temperatures
To prevent the room temperature falling below zero during winter the heat pump can be set to maintain the room temperate steadily at 8°C when nobody is home.

-Toe Warming Function
When heating, the warm air will be directed to the floor just to make sure your feet feel warm.

-Smart Indoor Unit Installation
The indoor unit can be mounted either on the floor or the wall. The unit can also be mounted half concealed within a wall be removing the rear casing.

-Energy Star rating 2.5

Heating Capacity: 5.3kW
Heating Efficiency: Coefficient of Performance (COP) 3.612
Cooling Capacity: 5.2kW
Cooling Efficiency: Energy Efficiency Ratio (EER) 3.142

Dimension (H x W x D)
Indoor – 600 x 700 x 215
Outdoor – 700 x 995 x 396

GEH18 Floor Console (5.0kW)

GEH18 Floor Console (5.0kW) Image

-180 Degree Sine
Balances input power supply to give more efficient performance.

-High speed DSP (Digital Signal Processor)
More efficient control

-Twin Rotary Compressor
Smoother rotation and less vibration

-Power Factor Correction Technology (PWM)
Gives highers efficiency and better compressor protection by matching the inverter control wave to a smoothed sine wave form.

-1W Standby, PCB Protection
Reduces energy consumption. Switched mode power supply gives better printed circuit board protection between 85V – 265V

-Quiet

-Better Air Quality
Includes a range of filters that clean the indoor air and remove oxygen free radicals thus improving the air quality.

-Intelligent Defrosting
Only performed when needed, which reduces energy/waste by eliminating unnecessary defrosting.

-Cold Air Prevention
To prevent cold air brewing into a room when the unit is first turned on or after defrosting the indoor fan will remain off until the indoor coil reaches the desired room temperature setting.

-Mould and Odour Prevention
Once the heat pump is switched off the air direction panel closes and the indoor fan continues to run until the indoor coil is dry. This helps to keep the coil clean and prevents the growth of mould and bacteria as well as reducing bad odours in the heat pump.

-Wide Temperature Operation
Designed to operate efficiently from -15 to +45 deg C.

-De-humidifying

-Sleep Mode

-Turbo Mode

-Intelligent Air Flow

-Anti-Corrosion Outdoor Unit

-Functions for Low Ambient Temperatures
To prevent the room temperature falling below zero during winter the heat pump can be set to maintain the room temperate steadily at 8°C when nobody is home.

-Toe Warming Function
When heating, the warm air will be directed to the floor just to make sure your feet feel warm.

-Smart Indoor Unit Installation
The indoor unit can be mounted either on the floor or the wall. The unit can also be mounted half concealed within a wall be removing the rear casing.

-Energy Star rating 2.5

Heating Capacity: 5.3kW
Heating Efficiency: Coefficient of Performance (COP) 3.612
Cooling Capacity: 5.2kW
Cooling Efficiency: Energy Efficiency Ratio (EER) 3.142

Dimension (H x W x D)
Indoor – 600 x 700 x 215
Outdoor – 700 x 995 x 396